Breakaway / Yield
Motorized Torque Tester

Model: DI-12-SL

DI-12-SL Breakawy / Yield Torque Tester

PRICING
DELIVERY
SUPPORT
  • Selectable units: lbf-in, kgf-cm, N-m.
    ozf-in units avaiable
  • Peak, Real Time and Breakaway/Yield measuring modes (selectable)
  • RS-232C output
  • Both CW and CCW operation
  • 1/4" female hex
Torque Screwdriver

Dimensions | Data Acquisition

 Light Weight Digital Torque Screwdriver

DI-12 Motorized Torque Tester drives the test piece at consistent speed and:

  1. Detects breakaway torque without overtorquing pretightened fasteners
  2. Detects the yield torque of the screw joint
  3. Displays real time torque values and captures peak torque
  4. Tightens fasteners to preprogrammed torque values
DI-12-SL Yield Torque Detector
DI-12-SL Ranges Accuracy: ±1% F.S., 1LSD
Model
Capacity
lbf-in 
kgf-cm 
N-m (mN-m) 
DI-12-SL4
0.30 – 35.00
0.30 – 40.00  
0.030 - 4.000 N-m 
DI-12-SL02
0.015 – 1.800
0.015 – 2.000  
1.5 - 200.0 mN-m 
DI-12-SL15
3.0 – 130.0
3.0 – 150.0  
0.30 - 15.00 N-m 
DI-12-SL4oz
3.0 – 560.0 ozf-in
— 
—  
DI-12-SL02oz
0.15 – 28.00 ozf-in
—  
—  

DI-12-SL Specifications
Display
4 digit LCD display
Operation 
Both CW and CCW motorized rotation
Measurement modes
P-P: Displays PEAK Torque value that will not change
until a higher value is measured.
T-R: Displays TRANSIENT torque values.
RG: Determines peak down and yield torque (CW only)
If a peak down torque value is detected, the green indicator
will light, and tester rotation will stop automatically.
Test Start Value
Start of RG Mode can be set in 0.001 N-m increments.
RS-232 Output
Continuous (9600 baud) output in PP and RG measuring modes.
Auto-power-off
After 5 minutes of non-use.
Dimensions
Detector: 44mm diameter × 190mm length, 1/4" hex drive
Indicator: 87mm W × 108mm D × 33mm H