Special Force Gauge Attachments

PRICING
DELIVERY
SUPPORT

Small Pin Grips

(22 lbf capacity)
Grip small diameter wires, pins, filaments.
PC-0.5 (0-0.5mm),
PC-1 (0.5-1mm), or
PC-2 (1-2.0mm)

Penetrating Pins

(44 lbf capacity)
Check the hardness of clay-like materials, the burst strength of plastic coverings, etc.
PG-2 (2mm), PG-3 (3mm),
PG-4 (4mm), PG-5 (5mm)

Fine Point Chucks

(22 lbf capacity) Grip for small wire, components in narrow spaces.
FP-50 (0.5mm open)

Small Chucks

(35 lbf capacity) Test wire, components, other pull tests.
SC-3 (3mm wide) or
SC-8 (8mm wide)

Thin Film Grips

(110 lbf capacity)
Check the tensile strength of thin film samples up to 2mm thick.
FC-20 (20mm wide)
FC-40 (40mm wide)
FC-70 (70mm wide)
FC-100 100mm wide)

Cam Grips

(110 lbf and 440 lbf capacity)
GR-30 (up to 30mm wide and 2 mm thick, 110 lbf)
GR-2000 (50mm wide,
4mm thick, 440 lb)

Large Flat Heads

Suitable for general push/crush testing.
AA-30 (30mm), AA-40 (40MM), AA-55 (55mm), AA-60 (60mm), AA-100 (100mm)

Universal Joints

Flexible coupling connects measuring shaft and attachment.
UJ-6 (M6 thd. 220 lbf capacity),
UJ-10 (M10 thd. 440 lbf capacity)

Wire Wrapping Grips

Test strength of wires, filaments, fibers, etc.
WC-30 (110 lbf capacity),
WC-2000 (440 lbf capacity)

Tape Grips

(110 lbf capacity)
Self-tightening “buckle-type” mechanism ensures slip-free operation.
TG-60 (30mm wide), TG-100 (50mm wide), TG-150 (150mm wide), TG-200 (200mm wide)

Peeling Attachments

(110 lbf capacity)
Test bonding strength, peel force of laminated materials, etc.
PF-1 (for pull),
PF-2 (for push)

Jacob’s Chucks

Grip shafts and rods.
GC-5 (5mm, 110 lbf capacity)
GC-15 (13mm, 220 lbf capacity)

Wire Terminal Grips

Spring loaded 20mm jaws open to 5mm. Secures the wire terminal without gripping the wire jacket for pull tests.
WG-1 (220 lbf capacity)
WG-2

Cam Grip

Mounted to the gauge, cam action grips wire and elastomers up to 4.5mm
RC-20 (50 lbf capacity)

Wire Cam Grips

Cam action grips quickly and easily up to 6mm. 
WG-300 (220 lbf capacity)

Vise Chucks

(220 lbf capacity)
Screw tightened vise is ideal for slip-free attachment to base of test stand.
GT-30 (38mm wide jaw opens to 39mm)

Flat Chucks

(220 lbf and 1100 lbf capacity)
Square serrated face, heavy-duty flat chuck.
GC-1001 (10mm open), GC-1021 (20mm open)
GC-5000 (30mm open,1100 lbf)

Wedge Grips

This spring-loaded wedge grip is ideal for tensile measurements of thick materials.
KC-20 (110 lbf), KC-1000 (220 lbf)
KC-5000 (1100 lbf)

Bend Stands

Tests the bend strength of rods, strips, etc.
GA-1000N (60mm wide, 220 lbf)
GA-5000N (60mm wide, 1100 lbf)