Digital Pull Tester – PT-DPS

• Horizontal test stand
• DPS Digital Force gauge (choice of range)
• WG-1 Grip
• Max Load: 220 lbf
• Outstanding accuracy of ±0.2%
• Real time and peak mode (selectable)
• Newton, lb and Kg units are selectable
• RS-232C, Digimatic and analog outputs
   

Dimensions | Data Acquisition

The Model PT-DPS is a digital pull tester for checking of pull-off force values of electrical leads, crimped terminals, connectors, and soldered parts.
Complete with test stand, DPS force gauge, wire grip and wire terminal grip.
WG-1 grip is perfect for pull testing crimp on terminals. Set the opening size by turning the wingnut until jaws contact sample, then back off a little until the sample slides into the jaws from the side. Then you can simply slide the next sample into the jaws when you are ready to test.

DPS Ranges (Resolution) Accuracy: ±0.2% F.S. ±1 LSD     

Model

Capacity (Resolution)

Pounds/Ounces

Kilograms/Grams

Newtons

DPS-0.5

8.819 ozf (0.001 ozf)

250.0 gf (0.1 gf)

2.452 N (0.001 N)

DPS-1

17.64 ozf (0.01 ozf)

500.0 gf (0.1 gf)

4.903 N (0.001 N)

DPS-4

4.409 lbf (0.001 lbf)

2.000 kgf (0.001 kgf)

19.61 N (0.01 N)

DPS-11

11.02 lbf (0.01 lbf)

5.000 kgf (0.001 kgf)

49.03 N (0.01 N)

DPS-44

44.09 lbf (0.01 lbf)

20.00 kgf (0.01 kgf)

196.1 N (0.1 N)

DPS-110

110.2 lbf (0.1 lbf)

50.00 kgf (0.01 kgf)

490.3 N (0.1 N)

DPS-220

220.5 lbf (0.1 lbf)

100.0 kgf (0.1 kgf)

980 N (0.1 N)