|
|
Home | motorized test stands
Motorized Test Stand Accessories |
| |
|
 |
The digital distance meter can be mounted to any Imada test stand and
provides RS-232C output.
Distance Meter Specifications |
Display |
Push button for inch/mm, zero set and on/off |
Resolution |
0.0005"/0.01 mm |
Accuracy |
0.1% of reading or 0.005"/0.1mm, whichever is greater
|
|
|
 |
The timer can be used with MX and MH motorized test stands to apply a force value for specific time period and then repeat the cycle continuously up to 72 hours.
Timer Specifications |
Range |
1 sec~99min, 59sec |
Accuracy |
±0.01%, ±0.05sec |
|
|
 |
Lexan Safety Shield – LP-99
- 1/4" unbreakable lexan
- Helps protect personnel from injury by containing debris during
testing
- Allows access to the control panel
The lexan safety shield offers protection to the operators
of motorized test stands. Access to the test stand controls is
still available through the front of the shield. Made of 1/4"
lexan, it is virtually unbreakable and will contain the debris
from destructive testing. Helps to prevent accidental injuries.
Fits all Imada motorized vertical test stands. Dimensions 16.5"
x 15.75" x 31.5" |
| |
|
