Mechanical Force Gauges Digital Force Gauges Torque Testers Manual Test Stands Motorized Test Stands Attachments Push / Pull Testers Crimp Testers Peel Testers Spring Testers Puncture Testers Compression Testers Strength Testers Force Data Acquisition Torque Data Acquisition Trade In

Home | motorized test stands

Motorized Horizontal Test Stands – MH-275
 

MH-275
Force gauges and attachments are sold separately.

MH-275 without distance meter
MH-275S with distance meter
Maximum load 275 lbf

PRICING
DELIVERY
SUPPORT
  • One stand for both compression (push) and tension (pull) tests
  • Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control Force Control operation with Imada Z Series force gauges
  • Wide speed range: 0.3 – 7 in/min (optional speed ranges available)
  • Stroke 11.8" Optional timer and digital distance meter
  • Conditional Overload Prevention

 

 
Speed Configurations
Standard Speed
 0.3~7"/min
Optional High Speed
 0.6~15.7"/min
Optional Low Speed
 0.2~4.2"/min
Specify Speed When Ordering

MH-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.

Connect the MH-275 test stand with an Imada Series force gauge and enable force controlled testing and Conditional Overload Prevention.

High/Low Set Point Force Control

Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.

One Way Force Control

Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.

Speed control, quick return and emergency stop are standard features. The MH-275 accepts any of the standard range Imada force gauges.  Optional timer and digital distance meter available.

AP-002 Adapter Plate is available to mount most other force gauges to IMADA test stands.