Speed Configurations |
Standard Speed
|
.4~4"/min
|
Optional High Speed
|
.8~8"/min
|
Optional Low Speed
|
.2~2"/min
|
Specify speed
when ordering
Imada motorized test stands offer consistent and reliable
testing. Our Basic or Auto Cycle models are available in Standard,
High, and Low speeds. Speed control, quick return and emergency stop
are standard features. They accept any of the standard range Imada
force gauges and special attachments. Optional digital
distance meter is also available.
Basic Model: MH-500BA
Basic Models have top and bottom travel limits that can be
adjusted for a precise range of movement. Set the travel limits,
flip the direction switch up to move the cross head up to the top
travel limit at the selected speed. Flip the direction switch down
to send the cross head down to the bottom travel limit. The speed is
set by a Speed Adjust knob. Quick Return and Emergency Stop features
are also included.
Auto Cycle Model: MH-500AC
Auto cycle models have top and bottom travel limits that can be
adjusted for a precise range of movement. Speed Adjust, Quick Return
and Emergency Stop features are also included. These stands have
three function modes.
Manual Mode: While the Direction switch is held up, the head moves up. Holding
the switch down moves the cross head down. When the switch is
released the head stops. This mode is ideal for positioning.
Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up
at the desired speed, and when it reaches the top travel limit, it
automatically goes back and stops at the bottom travel limit,
completing one cycle. Pushing the switch down runs the cycle in
reverse.
Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross
head travels up and down repeating the cycle until either the Power
or Emergency switches is turned off. This mode is ideal for
applications such as fatigue testing.
|
