Contact | Company Info | Warranty | Repair | Home
Mechanical Force Gauges Digital Force Gauges Torque Testers Manual Test Stands Motorized Test Stands Attachments Push / Pull Testers Crimp Testers Peel Testers Spring Testers Puncture Testers Compression Testers Strength Testers Force Data Acquisition Torque Data Acquisition Calibration/Repair Trade In

Home | pull testers

Optical Fiber Pull Tester – MH-220AC-S-TL
 


 

PRICING
DELIVERY
SUPPORT

The IMADA Fiber Pull Tester is specially designed to perform pull tests on delicate optical fibers in the manufacturing environment that requires ruggedness and simple operation.

The unit has four preset force values (High Reject, High, Low and Low Reject), to the 2nd decimal value, set by four thumb wheel switches.

The pull tester will test the  fiber within the allowable preset force range between High and Low (i.e. between 1.05 kgf and 0.95 kgf) and maintain the force value for the preset duration (i.e. 5 sec) for the preset number of repetitions (i.e. 3 times) and stop, ready for the next test. 

Designed to shut off automatically in case of excessive or inadequate pull.


Click here for a complete list of special attachments
Optical Fiber Pull Tester Specifications
Pull Force
Up to 20 kgf (other ranges available)
Pull Force Units
kgf, lbf and N (push button selectable)
Resolution
0.01 kgf (for 20 kgf capacity)
Force Holding Accuracy
within ± 5% of set value
Overload Capacity
200% F.S.
Measure Mode
Real time and Peak modes (selectable)
Stroke
150 mm
Speed
Dual Speed: 10 mm/min to 100 mm/min adjustable with final force control speed of 15 mm/min
Preset Capability
a) Force Value: High Reject, High, Low and Low Reject set points kg/ increments of 0.01 kgf (by four thumb wheel switches)
b) Force Holding Duration: Up to 99.99 sec
c) Rest Time Duration: 2 sec (fixed)
d) Repetition Counter: Up to 9999 with display
Outputs
RS-232C