Contact | Company Info | Warranty | Repair | Home
Mechanical Force Gauges Digital Force Gauges Torque Testers Manual Test Stands Motorized Test Stands Attachments Push / Pull Testers Crimp Testers Peel Testers Spring Testers Puncture Testers Compression Testers Strength Testers Force Data Acquisition Torque Data Acquisition Calibration/Repair Trade In

Home | torque testers

Digital Torque Tester for Air Tools & Impact Wrenches
 

 

Test bracket and spring adapters are sold separately.

Model DI-1M

PRICING
DELIVERY
SUPPORT
  • Ergonomic light weight, torque tester with heavy duty metal construction
  • Easy to read LED panel displays reference torque value in lbf-ft, kgf-m and N-m (selectable); 
    and number of blows for selected period (0.1 - 9.9 sec)
  • Peak, Real Time and Peak Down measuring modes (selectable)
  • Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
  • Both clockwise and counterclockwise operation
  • RS-232C output for SPC capability (peak data only)
  • Runs on internal NiCad batteries (8 hour use)
  • AC charger included

 


 

DI-1M torque testers are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power driver. These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable. RS-232C output, auto zero reset, auto shutoff and low battery indicator complete the set of features. It is powered by an internal NiCad battery or the included AC adapter.

Peak, Real Time and Peak Down modes are selectable.
Peak mode captures the peak torque achieved during a test. PEAK reading will not change until a higher value is measured.
Real Time mode displays the real time transient torque value.
Peak down captures the critical first peak value and will not change even if a higher value is subsequently measured.

The DI-1M also provides peak data for SPC (statistical process control) via the RS232 port. Click on the link below for torque tester data acquisition software.

Choose from four different remote sensors for the DI-1M, available in ranges up to 362 lbf-ft with 3/8", 1/2" or 3/4" drives. The package includes the remote sensor, display unit, cable and AC adapter/charger.

Calibrate your own air tools and impact wrenches and save down time.
 

Digital Torque Tester Ranges   Accuracy ± 0.5% F.S., ±1 LSD      
Model
Capacity (Resolution)
 
lbf-in
kgf-cm
N-m
DI-1M-50   
3.0~440.0
3.0~500.0
30~5000 (N-cm)
DI-1M-200A
30~1800
30~2000
3.0~200.0
 
lbf-ft
kgf-m
N-m
DI-1M-200
3.0~145.0
0.30~20.00
3.0~200.0
DI-1M-500
3.0~362.0
0.30~50.00
3.0~500.0

 

SJ Spring Adapter Specifications     
Model
Capacity
Drive
Screw
for Model
SJ-200
200 lbf-in  
3/8"
3/8-16
DI-1M-50
SJ-300
300 lbf-in  
3/8"
1/2-13
DI-1M-50
SJ-500
500 lbf-in 
1/2"
1/2-13
DI-1M-200
SJ-1000
1000 lbf-in  
1/2"
3/4-10
DI-1M-200
SJ-2000
2000 lbf-in  
3/4"
3/4-10
DI-1M-500