Crimp Tester -
Motorized with Output
- Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
- Wide speed range: 0.4 – 11.5 in/min (optional speed ranges available)
- Max clearance 9" (with extender 14")
- No programming required
- Newton, lbf and kgf units are selectable
- Accuracy: ±0.2% F.S. ±1 LSD
- RS-232C, Digimatic and analog outputs
Motorized digital crimp testers are designed to check the pull-off force values of electrical leads, crimped terminals and connectors and ensure consistent results by controlling force and speed. The system is configured with a motorized test stand and Imada DS2 or Z2 force gauge in the range of your choice and attachments; cam grip, vise chuck, WG-1, WG-2, WG-3 or KC-100 grip to suit your application. Data acquisition software is available as well as attachments for other applications.
Setup shows Z2 force
gauge with WG-3 wire terminal grip
and WG-300 cam grip
All items sold separately
Crimp Tester Ranges (Resolution) |
|
Z2 Capacity (Resolution) |
DS2 Capacity (Resolution) |
Pounds/Ounces |
Pounds/Ounces |
7.00 ozf (0.01 ozf) |
7.00 (0.01 ozf) |
18.00 ozf (0.01 ozf) |
18.00 (0.01 ozf) |
4.400 lbf (0.001 lbf) |
4.400 (0.001 lbf) |
11.00 lbf (0.01 lbf) |
11.00 (0.01 lbf) |
44.00 lbf (0.01 lbf) |
44.00 (0.01 lbf) |
110.0 lbf (0.1 lbf) |
110.0 (0.1 lbf) |
| 220.0 (0.1 lbf) p;p; | 220.0 (0.1 lbf) |
| 440.0 (0.1 lbf) p;p; |
— |
| 1100.0 (1 lbf) |
— |
Motorized Crimp Pull Testers |
||||
|
|
|
|
|
|
Model |
||||
Capacity |
110 lbf |
275 lbf |
500 lbf |
1100 lbf |
Features |
Auto cycle and Force Control Capability |
|||
Crimp Test Attachments |
|||||
|
|
|
 |
 |
 |
WG-1 |
WG-2 |
WG-3 |
KC-100 |
GT-30 VISE CHUCK |
WG-300 CAM GRIP |
WG-1 is perfect for pull testing crimp on terminals. Set the opening size by turning the wingnut until jaws contact sample, then back off a little until the sample slides into the jaws from the side. Then you can simply slide the next sample into the jaws when you are ready to test.
WG-2 grips the actual wire or sample tested with serrated jaws. Ideal for a variety of shapes.
WG-3 multi terminal grip has 12 wire gauge apertures on the turret. Locate the appropriate size, lock in position and you’re ready to test.
The KC-100 spring- loaded wedge grip is ideal for tensile measurements of thick materials (up to 10mm thick). The serrated jaw is 15mm wide.